Tomasz's BMG top motor mounted ADXL345
Created by: Tomasz Paluszkiewicz
Description¶
An accelerometer mount atop the BMG stepper motor.
Design incorporates a groove under the place where header pins poke down, to be able to lay the accelerometer flat on the mount.
BOM¶
| No | Qty | Name | Printable |
|---|---|---|---|
| 1 | 1 | adxl345-bmg | Yes |
| 2 | 2 | DIN 912 M3 25 mm | No |
| 3 | 1 | AXDL345 | No |
| 4 | 2 | ISO 7380 M3 6 mm | No |
Compatible EVA version¶
2.0 and newer.
Print instructions¶
Print it vertically. 2 shells, 20-30% infill and 0.2 layer height should be fine.
Step Files¶
you can export step files from OnShape