Paweł's 3030/2020 Spool Holder
Created by: Paweł Kucmus
A spool holder with a screw, knob and a filament guide.
You can get different lengths of the screw thread and ends for different bearings (608 or 688) you can get those from Onshape.
| No | Qty | Name | Printable |
|---|---|---|---|
| 1 | 2 | M3 x 12mm | No |
| 2 | 2 | M3 Hen nuts | No |
| 3 | 3 | M8 Hen nuts | No |
| 4 | 1 | M8 threaded rod (screw thead length + 90mm) | No |
| 5 | 2 | 608 or 688 bearings | No |
| 6 | 1 | Arm 3030 / 2020 | Yes (3030) / Yes (2020) |
| 7 | 1 | Guide | Yes |
| 8 | 1 | Screw (90mm) | Yes |
| 9 | 1 | Knob | Yes |
